Q: Which connector should be selected for the engine monitoring sensor of helicopters operating at a temperature of 120℃? A: Choose the high-temperature resistant version of 12S series connectors (temperature resistance -55~150℃). It adopts ceramic insulators and high-temperature resis...

Application of Aerospace Connectors

Q: For consumer-grade UAVs (with 30-minute endurance) pursuing lightweight design, what connector should be selected? A: Choose the M8 miniature series connectors (weight ＜5g per unit). The 2~4 pins cover battery power supply and motor control scenarios, with a plugging force of ＜8N, makin...

Application of Aerospace Connectors

Q: Which connector should be selected for the communication module of military reconnaissance UAVs that require electromagnetic interference resistance? A: Choose the anti-interference version of WS series aviation connectors. With shielding effectiveness ≥ 90dB (compliant with MIL-STD-...

Application of Aerospace Connectors

Q: Do connectors for hot air balloons require a high protection rating? A: An ultra-high protection rating is unnecessary; IP65 is sufficient. Hot air balloons fly at a low speed (5~20km/h) without violent vibration, and they mainly face issues of dew (humidity 80%~90%) and dust. The 12S...

Application of Aerospace Connectors

Q: Why is the GX series recommended for the flight control connectors of industrial inspection UAVs? A: The GX series weighs less than 30g, meeting the lightweight requirements of UAVs (the total weight of connectors per aircraft ≤ 100g). It also withstands a temperature range of -40~...

Application of Aerospace Connectors

Q: Which connector should be selected for the probe of ultrasound scanners that need to transmit high-frequency signals (10MHz)?...

Application of Medical Devices Connectors

What connector is suitable for the test strip interface of blood glucose meters, which requires high precision and easy operation?...

Application of Medical Devices Connectors

Q: Which connector should be selected for the joint control of surgical robots requiring low latency? A: Choose the HR25 series medical-grade connectors. With a transmission rate of 1Gbps and latency ≤1ms, it can ensure the joint control accuracy of robots (±0.005mm), avoiding risks ca...

Application of Medical Devices Connectors

Q: What requirements should the connector for the blood oxygen sensor of monitors meet? A: It needs to be miniaturized (volume 15mm×15mm), low-power (current ≤1mA, compatible with monitor battery power supply for a battery life of ≥8 hours), and low-noise (signal-to-noise ratio ≥70dB t...

Application of Medical Devices Connectors

Q: The cables of charging piles are frequently bent, leading to easy connector breakage. Which type of connector is recommended? A: Select the SP series waterproof connectors with flexible cables. The cables are made of TPU material (resistant to ≥10,000 bends at a radius of 10mm). A...

Application of Automotive Vehicle Connectors

Q: Which connector should be selected for the airflow control module of ventilators? A: The push-pull K series (medical grade) is recommended. It complies with the FDA 21 CFR Part 820 quality standard and CE IVDR certification, withstands high-temperature sterilization at 121℃ (moist he...

Application of Medical Devices Connectors

Q: How to prevent loosening of connectors on the automotive chassis that are subject to long-term vibration (15g)? A: We recommend the WS series aviation connectors with threaded locking and anti-loosening nuts. Tighten the nuts to a torque of 0.8~1.2N·m during installation, which can eff...

Application of Automotive Vehicle Connectors

Q: Which connector should be selected for the lidar of intelligent connected vehicles with a transmission rate of 1Gbps? A: Choose the high-speed M12 X-code connector (8Pin), which supports the 1000BASE-T Ethernet protocol with a transmission rate of 1Gbps and latency ≤1ms. It also has an...

Application of Automotive Vehicle Connectors

Q: Can connectors be shared between traditional fuel vehicles and new energy vehicles? A: Most connectors are not interchangeable. Fuel vehicles focus on low voltage (12V) and low current (5~10A), such as DIN connectors (suitable for engine compartment power supply). New energy vehicles re...

Application of Automotive Vehicle Connectors

Q: Why are M12 X-code connectors preferred for the BMS of new energy vehicles? A: M12 X-code connectors support high voltage of 800V and large current of 60A, with a temperature resistance range of -40~125℃. They can transmit cell voltage and temperature data in real time (sampling accu...

Application of Automotive Vehicle Connectors