Q: Which connector should be selected for the power supply of communication base stations with a current of 15A? A: Choose the DIN series connectors (4Pin, rated current 15A), which comply with the IEC 60320 standard and meet the AC 220V power supply requirements of base stations. With a...

Q: For integrated 4G/5G base stations, which connector is suitable for dual-band compatibility? A: Select the N series RF connectors, which support an operating frequency of ≤18GHz (covering 4G 1.8GHz and 5G 3.5GHz frequency bands) with a VSWR of ≤1.3. They are compatible with both 4G ...

Q: Which connector should be selected for satellite communication terminals that require radiation resistance? A: Choose the radiation-resistant version of GX series aviation connectors, which can withstand a radiation dose of 100krad (meeting the 5~10 year on-orbit service life requirem...

Q: How to make connectors for shipborne radars resistant to electromagnetic interference? A: Select the WS series aviation connectors (shielding effectiveness ≥80dB, compliant with MIL-STD-461G standard). Their shells are made of nickel-plated brass (offering better electromagnetic shie...

Q: Which connector should be selected for the RF module of 5G base stations? A: The SMA series RF connectors are recommended. They support an operating frequency of ≤6GHz (covering 5G Sub-6GHz frequency bands such as 3.5GHz and 4.9GHz) with a voltage standing wave ratio (VSWR) of ≤1.2 ...

Q: For household energy storage systems (power 5kW) with a limited budget, are there any cost-effective connectors available? A: The LD series waterproof connectors (IP67) are recommended. Their unit price is only 50% of that of the XT60 series, with a rated current of 20A (meeting the req...

Q: How to prevent the detachment of nacelle connectors for wind power equipment under high-altitude vibration (5g)? A: Select WF series aviation connectors with anti-loosening buckles. The buckles are locked during installation (special tools are required for unlocking), which can effectively...

Q: Which connector is suitable for energy storage battery packs with 1000 charge-discharge cycles? A: Choose the high-current version of WS series connectors (6Pin, rated current 50A). With a contact resistance of 2mΩ, it reduces charge-discharge losses and improves energy storage efficiency...

Q: Do connectors for photovoltaic inverters need to be UV-resistant? A: Yes, it is a must. The SP series waterproof connectors (IP68) are recommended. Their shells are added with UV stabilizers (compliant with ISO 4892-3 UVB 313nm standard), enabling them to resist outdoor UV radiation with a...

Q: Which connector should be selected for 200kW ultra-fast charging piles of new energy vehicles? A: The XT60 series (high-current type) is recommended. It has a rated current of 60A and a peak current of 120A, with a contact resistance of 3mΩ. It can withstand high temperatures during ...

Q: For robot end effectors (e.g., grippers) requiring frequent tool changes and quick plugging, which connector is recommended? A: Choose the push-pull Series K quick connectors, which enable plugging and unplugging in 10 seconds (tool-free, one-handed operation) and have a plugging life...

Q: For the sensor interfaces of service robots (e.g., restaurant robots) requiring miniaturization, what connector should be selected? A: Select the M5 miniature series connectors (5mm in diameter, weight 3g). With 2–4 pins, they support signal transmission for infrared sensors and ultr...

Q: Which connector is suitable for the charging port of AGV robots with 20 plugging cycles per day? A: Choose the Series XT60 high-current connectors (rated current 30A), which have a plugging life of ≥5,000 cycles (calculated at 20 times a day, it can be used for more than 6 years). Th...

Q: Can industrial-grade connectors be used for medical surgical robots? A: No. Medical-grade connectors (such as the Series HR25) are required. They comply with the ISO 10993 biocompatibility standard (non-cytotoxic and non-sensitizing), withstand high-temperature sterilization at 121℃ ...

Q: Which connector should be selected for the joints of industrial robots? A: The push-pull Series B is recommended. It features ±90° torsion resistance (suitable for 360° rotation of robot joints) and a plugging force of 15N. It can transmit both power (5A) and encoder signals (100Mb...