LD24/SP24 Docking Connector Dimensions and Specs Guide

LD24/SP24 Panel Mount Connector Dimensions and Specs

LD24/SP24 Docking Connector Dimensions, Specifications, and Materials

This guide explains the dimensions, specifications, and materials of the LD24/SP24 docking connector. It is intended as a reference for engineers and procurement teams evaluating panel-mounted docking solutions for industrial equipment, battery production lines, and other applications that require a robust, square-format interface.

Key Selection Criteria for the LD24/SP24 Series

When assessing the LD24/SP24 docking connector for your project, focus on the following decision points to ensure a proper fit:

• Interface and Mounting: Confirm the panel cutout dimensions and mounting hole pattern against your enclosure design. The LD24/SP24 series uses a square docking interface; verify the specific panel thickness range supported.
• Electrical Ratings: Check the rated current and voltage for the specific contact arrangement you need. Always compare these rated values against your actual load requirements, accounting for any derating at elevated ambient temperatures.
• Environmental Protection: Review the IP rating to confirm suitability for your operating environment, particularly regarding dust and water ingress. Note that the protection level typically applies when the connector is mated and locked.
• Contact and Material Specifications: Verify the contact plating material (e.g., gold or silver) and the housing material to ensure compatibility with your application's corrosion and wear expectations.

Understanding the Dimensional Drawing

The figure provides the critical envelope dimensions for the LD24/SP24 connector. Use these measurements to validate clearance in your assembly and to design the mating panel cutout. Pay attention to the overall length, width, and depth, as well as the location of any keying features that ensure correct orientation during mating.

Material and Construction Notes

The materials used in the LD24/SP24 series are selected for durability in demanding industrial settings. The housing material and contact plating directly influence the connector's mechanical strength, chemical resistance, and electrical performance over its service life. Confirm that the specified materials meet your application's requirements for temperature range and exposure to chemicals or moisture.

Application Context: Battery Production Lines

For a practical example of how the LD24/SP24 series performs in continuous-duty environments, see this case study on LD24/SP24 panel mount connectors used in battery production lines. It outlines how the connector's square docking interface and mounting characteristics support automated equipment that requires frequent, reliable mating cycles.

Next Steps for Your Project

To confirm that the LD24/SP24 docking connector meets your specific application requirements, review the detailed dimensional drawing and specification table. If you need assistance interpreting the data or selecting the correct contact arrangement, please submit an inquiry with your project details. Our team can help verify compatibility with your enclosure and electrical load.