LD32/SP32 Electrical Panel Mount Connector Dimensions and Specs

LD32/SP32 Square Flange Connector Dimensions and Materials

LD32/SP32 Electrical Panel Mount Connector Overview

This page provides the verified dimensions, technical parameters, and material specifications for the LD32/SP32 Electrical Panel Mount Connector. Use this data to confirm panel cutout requirements, electrical ratings, and environmental suitability before integrating the connector into your equipment design.

Key Selection Criteria for the LD32/SP32 Connector

When evaluating this panel mount connector for your application, verify the following points against your system requirements:

• Panel mounting dimensions: Confirm the panel cutout size and mounting hole pattern match your enclosure design.
• Electrical ratings: Check the rated current and voltage against your load profile, including any derating required for continuous operation or elevated ambient temperatures.
• Environmental protection: Verify the IP rating and operating temperature range suit your installation environment, especially for outdoor or washdown areas.
• Mating interface: Ensure the plug side (SP32) is compatible with your existing cable assembly or planned wiring.
• Material compatibility: Review the housing and contact materials for corrosion resistance in your specific operating atmosphere.

Dimensions and Mechanical Data

The figure referenced on this page shows the complete dimensional layout for the LD32/SP32 connector. Key mechanical values include the panel cutout diameter, mounting hole spacing, and overall connector depth. Verify these figures against your enclosure wall thickness and available clearance behind the panel before ordering.

Electrical Specifications

Electrical parameters for this series are defined for the connector under standard test conditions. When applying the connector in your system, consider whether your operating current or voltage requires derating based on wire gauge, ambient temperature, or continuous duty cycle.

Materials and Construction

The LD32/SP32 uses materials selected for industrial reliability. Confirm that the housing material, contact plating, and sealing elements are compatible with any chemicals, moisture, or temperature extremes present in your application environment.

Application Fit and Installation Notes

This panel mount connector is suited for equipment requiring a sealed bulkhead connection point. During installation, ensure the panel surface is flat and the mounting hardware is torqued to specification to maintain the stated environmental protection. For related dimensional data on other sizes in this family, see the LD32/SP32 Square Flange Connector Dimensions and Materials reference.

Next Step: Confirm Your Configuration

Before placing an order, prepare your panel cutout drawing, required pin count, and cable entry direction. If your application requires a complete wired assembly, review the SP13 Waterproof Male Plug to Panel Mount Female Connector Cable Assembly example to understand how mating connectors are integrated. Contact our engineering team with your current and voltage requirements, environmental conditions, and panel thickness to verify the LD32/SP32 fits your design.