LD16/SP16 Docking Connector Dimensions and Specifications

LD16/SP16 Flange Connector Dimensions and Materials

LD16/SP16 Docking Connector Dimensions, Specifications, and Materials

This page provides the verified dimensional drawings, technical specifications, and material data for the LD16/SP16 docking connector series. Use this information to confirm mechanical fit, electrical ratings, and environmental suitability before integrating the connector into your equipment design.

Dimensional Drawing and Mechanical Fit

The accompanying drawing illustrates the physical dimensions of the LD16/SP16 docking connector. Verify the mounting hole pattern, panel cutout, and overall envelope against your enclosure or bulkhead requirements. Confirm the mating face dimensions and thread type to ensure compatibility with your existing cable assembly or panel layout.

Electrical and Environmental Specifications

Review the rated current, voltage, and contact resistance values for your specific application. Note that operating conditions such as ambient temperature, continuous load, and vibration may require derating from the nominal values. Confirm the IP rating and temperature range against your installation environment, especially for outdoor or washdown applications.

Material and Construction Details

The connector body, contact plating, and sealing materials are specified in the drawing. Verify chemical compatibility with any oils, solvents, or cleaning agents used in your facility. For marine or high-humidity environments, confirm the corrosion resistance of the housing and contact materials.

Selection Checklist

• Confirm the pin count and contact layout match your wiring scheme.
• Verify the cable entry size and clamping range for your wire gauge.
• Check the mounting style (flange, rear nut, or free-hanging) against your panel design.
• Validate the operating temperature and IP rating for your environment.
• Review the mating cycle rating for applications with frequent connect/disconnect.

Related Resources

For additional configuration options, review the LD16/SP16 flange connector dimensions and materials or the LD16/SP16 rear nut connector specifications. For a real-world installation example, see the LD16/SP16 flange connector case study for packaging lines in Malaysia.

Request a Quote or Ask a Question

If you need assistance confirming the LD16/SP16 docking connector for your application, submit the inquiry form below or contact us via WhatsApp. Provide your required pin count, cable diameter, mounting style, and environmental conditions so we can verify the correct part number for your project.